FESTO快插式压力控制阀，FESTO压力控制阀选择要点

FESTO快插式压力控制阀，FESTO压力控制阀选择要点

企业QQ:2880626089

手机（同微信）：17316599802

邮箱：17316599802@163.com

电 话：021-39529830转8009

传真；021-39947181

联系人：郑娜

• With threaded and push-inconnector

• Screw-in threadM5, Rx, R¼

• Push-in connectorfor tubing O.D. 4 ... 8 mm

• Push-in connector, can be rotated360°

The pressure regulator maintains anessentially constant output pressure

The differential pressure regulator

Design Directly actuated piston regulator with through pressure supply

Regulating function With return flow, differential pressure constant

Type of mounting Can be screwed in Mounting position Any

Actuator lock Knurled screw with lock nut

maintains a manually adjustedifferential pressure between the

primary pressure at the screw-inthread and the output pressure at the

差压调压阀

接口：M5, G1/8, G1/4, G3/8, G1/2

快插接头：4, 6, 8, 10, 12 mm

流量：30 ... 760 l/min

在气源处理元件外使用

带集成的单向阀

• Minimal dimensions

• Constant output pressure

connection end thanks to anintegrated non-return valve.

on the secondary side independent of pressure fluctuations on the primary

side and air consumption.

The primary pressure at the screw-in hread is reduced when air is

exhausted from the QS push-inconnector.

针对某一动作进行压力调节，因此能效更高。

连接尺寸 M5, G 1/8, G 1/4, G 3/8, G 1/2

快插接头

流量 22 … 760 l/min

脱离空气预处理单元单独使用

• Version with pressure gauge

• Screw-in thread M5 … R¼ or

push-in connector ∅ 4 … 8 mm

QS push-in connector.

Pressure applied at the QS push-inconnector can be exhausted with no

change in pressure at the threadconnection end thanks to an

integrated non-return valve

The pressure regulator maintains an

essentially constant output pressureon the secondary side independent of

pressure fluctuations on the primary

side and air consumption.

The primary pressure at the screw-in

thread is reduced when air is

exhausted from the QS push-in

connector.

FESTO快插式压力控制阀，FESTO压力控制阀选择要点