油研电磁比例换向阀型材，进口YUKEN阀

油研电磁比例换向阀型材，进口YUKEN阀

　　上海乾拓贸易有限公司

　　企业QQ：2880626087

　　电话；021-69001039

　　手机；17321017802（微信）

　　邮箱；17321017802@163.com

　　联系人；杨婷玉

　　地址：上海市嘉定区江桥嘉涌路99弄6号713室

　　Mounting Posture

　　For any model, there are no restrictions reg

　　mounting posture.

　　Solenoid Energisation

　　When energising one solenoid, be sure to de-energise

　　another solenoid beforehand.

　　Tank Port

　　Do not connect the tank port to any pipe line having a

　　surge pressure in it. Be sure to kenewly developed as a "Mini-series". Compared with DSG-01 series,

　　the valves are much more compactly manufactured but enjoy a maximum

　　operating pressure of 25 MPa (3630 PSI) and a maximum flow rate of

　　10 L/min (2.6 U.S.GPM), while contributing further to a space saving

　　一定要在下列规定的条件下使用液压油：

　　粘度：20-200mm 2 / s（100-930SUU），温度：-15?+ 60℃（5?140°F）。

　　TJ的粘度和油温

　　必须注意保持对可能导致的液压油污染的控制

　　故障和缩短阀门的使用寿命g we

　　包括下表中的四个内六cautious attention to a surge voltage.ep the end of the tank line

　　pipe below the oil level. As the solenoids are of wet type

　　structure, it is necessary to make piping in such condition

　　that the inside of the valve is always filled with the fluid.角头螺栓。

　　子板可用。 从上表中子板号。 当不使用子requirement. Moreover, usin以使用下表中列出的液压油类型。

　　安装螺栓该

　　有一个很好的完成。arding the板时，配套表面应t armature solenoids, the valves

油研电磁比例换向阀型材，进口YUKEN阀