宝帝先导式活塞阀，BURKERT活塞阀选型样本

宝帝先导式活塞阀，BURKERT活塞阀选型样本

上海乾拓贸易有限公司 

　企业QQ：2880626087

　电话；021-69001039

　手机；17321017802（微信）

　邮箱；17321017802@163.com

　地址：上海市嘉定区江桥嘉涌路99弄6号713室

先导式阀 2400 具有一个伺服活塞，该活塞带有双向先导式控制装置。

其设计适合高压。这种阀门结构的特征在于阀座和密封元件的设计。

通过一个附加的径向密封件能够实现很好的密封性。先导式控制装置的锥形密封元件，允许在冲洗功率相对较小的情况下接通高压。

重叠的线圈系统

高温版本，较高至

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

2/2-way Solenoid Valve Servo Operated for High Pressure

The servo-assisted Type 2400 valve has aservo-piston with a 2-way servo-control. It is designed for high pressures. 

The speciality of this valve design lies in the layout of the seat and sealing element. Anadditional radial seal make very good sealing possible. 

The tapered sealing element of the servocontrol permits the switching of high pressureat relatively low coil power.

Technical data Body material stainless steel, brass and brass, nickel-plated Valve internals stainless steel Sealing material PEEK/FKM; PCTFE/FKM; PTFE/FKM Media neutral gases and fl uids Medium temperature PEEK/FKM PCTFE/FKM PTFE/FKM –10 to +80 °C –10 to +80 °C –10 to +80 °C Ambient temperature max. +55 °C Viscosity ca. 21 mm/s Operating voltage 24/DC 24/220-230 V / 50 Hz other voltages on request Voltage tolerance ±10% Cycling rate ca. 80/min Duty cycle 100 % continuous rating Electrical connection Cable plug (part of the delivery) Protection class IP65 with cable plug Installation as required, preferably with actuator upright

伺服辅助型2400阀门具有双向伺服控制的活塞。它是专为高压设计的。

该阀门设计的特点在于座椅和密封元件的布局。额外的径向密封可以实现非常好的密封。

伺服控制的锥形密封元件允许高压的切换相对较的线圈功率。

技术数据主体材质不锈钢，黄铜和黄铜，镀镍阀门内部不锈钢密封材料PEEK / FKM; PCTFE / FKM; PTFE /

 FKM介质中性气体和液体介质温度PEEK / FKM PCTFE / FKM PTFE / FKM -10至+80°C -10至+80°C -10至+80°C

环境温度较高+55°C粘度约21 mm / s工作电压24 / DC 24 / 220-230 V / 50 Hz其他电压请求电压公差±10％循环速率ca。

80 / min占空比100％连续额定值电气连接电缆插头（部分交货）防护等级IP65带电缆插头根据需要安装，较好带执行器直立

Technical data

Kv value [mm/h]: Flow rate value for water, measured at +20 °C and 1 bar pressure differential over a fully opened valve. Pressure data [bar]: Overpressure with respect to atmospheric pressure Response times [ms]: m easured at valve outlet at 6 bar and +20 °C Opening pressure build-up 0…90% Closing: pressure relief 100…10%

Orifi ce Kv-value water

Port connection

Pressure range Electrical power consumption

Response times Weight

[mm] [m/h] AC [bar] DC [bar] Inrush Hold Opening [ms] Closing [ms] [kg] 5.0 0.6 G 1/4 1–250 1–200 AC 85 VA 48 VA/20 W 100 300 1.2 8.0 1.0 G 3/8 1–250 1–210 bis bis 1.4 12.0 2.6 G 1/2 1–250 1–160 DC 20 W 20 W 200 500 1.95

Circuit functions of the valve

A Circuit function A

Circuit function B

2/2-way valve, servo-assisted, normally closed, with servo-piston

2/2-way valve, servo-assisted, normally open, with servo-piston

Schematic diagram

Dimentions [mm]

D N D A B C F H K 5,0 G 1/4 30 12 ∅ 50 8 126 ∅ 50 8,0 G 3/8 29 8 ∅ 40 8 126 ∅ 65 12,0 G 1/2 29 8 ∅ 40 14 153 ∅ 75

宝帝先导式活塞阀，BURKERT活塞阀选型样本