YS产品德国倍加福过程控制显示器，P+F过程控制显示器说明书

YS产品德国倍加福过程控制显示器，P+F过程控制显示器说明书

上海乾拓贸易有限公司 

　企业QQ：2880626087

　电话；021-69001039

　手机；17321017802（微信）

　邮箱；17321017802@163.com

　地址：上海市嘉定区江桥嘉涌路99弄6号713室

EMC Directive 2004/108/EC EN 61000-6-2:2006 

DIN EN 55011:2009, Class B 

Standard conformity  

 Galvanic isolation EN 61010-1:2010 

 Shock and impact resistance EN 60068-2-27:2009 

EN 60068-2-29:1995 

Vibration resistance EN 60068-2-6:2008 

Ambient conditions

Ambient temperature -10 ... 50 °C (14 ... 122 °F 

Impedance > 1 MΩ for voltage measurement 

22 Ω + PTC 25  Ω for current measurement 

Analog voltage input 0 ... 10 V / 2 ... 10 V DC, -10 ... 10 V DC 

Programming keypad-driven menu 

Indicators/operating means

Type 14-segment LED display, red 

Number of digits 6 

Display value digit height 14 mm 

Key interlock with "high"-level at terminal "KEY" 

Display interval -199999 ... 999999 

with suppression of leading zeros 

Decimal point freely adjustable 

Analog current input 0 ... 20 mA / 4 ... 20 mA 

Storage temperature -20 ... 70 °C (-4 ... 158 °F) 

Relative humidity ≤ 80 % (noncondensing) 

Mechanical specifications

Process control and indication equipment DA6-IU-2K-C

Operation via keypad

Characteristic programmable via 12 interpolation points

Resetting the outputs, automatic, manual or with external signal

Connection via plug-in screw terminals

Auxiliary power output for sensors

Degree of protection IP65 in accordance with DIN EN 60529 (front only)

Shock resistance in accordance with DIN EN 60068-2-27

Vibration resistance in accordance with DIN EN 60068-2-6

System hum suppression

Process control and indication equipment 

General specifications

Connection 8-pin and 9-pin connectors with screw terminals 

Dimensions 96 mm x 48 mm x 102 mm 

Resolution 15 Bit 

Scale factor via characteristic curve with up to 12 value pairs 

Reset manually or external 

Electrical specifications

Operating voltage 10 ... 30 V DC 

Pre-selection 2-fold 

Data storage > 10 years, EEPROM 

Mounting mounting frame with latch fastener 

Relay changeover contact 

 Switching voltage max. 250 V AC / 125 V DC 

min. 5 V AC / 5 V DC 

 Switching current max. 5 A AC / 5 A DC 

min. 10 mA DC 

 Switching power max. 1250 VA / 150 W 

Sensor supply 15 V DC ± 1 %, 25 mA 

Compliance with standards and directives

Directive conformity  

Protection class IP65 (front) 

Power consumption 3.8 W 

YS产品德国倍加福过程控制显示器，P+F过程控制显示器说明书