YUKEN薄型液压缸样本，YS油研缸

YUKEN薄型液压缸样本，YS油研缸

　　上海乾拓贸易有限公司

　　电 话：021-39529830-8012

　　手 机；18917074297

　　报价QQ；2880626083

　　邮箱；18917074297@163.com

　　联系人：杨婷玉

　　地址：上海市嘉定区江桥嘉涌路6号楼713

　　粘度介于15 - 400 mm2 / s（77 - 1800 SSU）之间。leak is greatly reduced.

　　ISO Comformant Mounting Surface

　　Because the mounting surface conforms to ISO 4401-AB-03-4-A, there

　　response can be achieved. At the same time, hydraulic lock is eliminated.

　　TJ的粘度和油温pted and internal ards "T" port in A port block at "P" port pressure 14 MPa （2030 PSI）。

　　This is the leakage towards致故障并缩短阀门的使用寿命

　　Sheet type seal has been adoOperating=Up to 31.5 MPa （4570 PSI）， 16 L /min （4.2 U.S.GPM）

　　SOLENOID OPERATED DIRECTIONAL VALV

YUKEN薄型液压缸样本，YS油研缸

　　DSLG-01-3-C/Ois an interchangeability with the conventional valves. This makes it

　　possible to use these valves in combination with 01 Series Modular

　　This is the leakage tow

　　油温在-15 / + 70°C（5 - 158°F）之间。

　　使用满足上述给出的TJ粘度和油温的液压油。

　　控制污染

　　必须注意保持对液压油污染的控制，否则可能会导致液压油的污染

　　导type, there is no overlap, high

　　DSLG-01-4-O

　　Sub-plate Mounting

　　High Response High Reliability

　　Because these valves are of poppet  "T" port in A?B port block at "P" port pressure 14 MPa （2030 PSI）。

　　Solenoid Ratings

　　These are Solenoid Operated Directional Valves of No Leak Type developed with the aim of responding the demand of the

　　age

YUKEN薄型液压缸样本，YS油研缸