小型压力开关资料，日本SMC

小型压力开关资料，日本SMC

　　上海乾拓贸易有限公司

　　电 话：021-39529830-8012

　　手 机；18917074297

　　报价QQ；2880626083

　　邮箱；18917074297@163.com

　　联系人：杨婷玉

　　地址：上海市嘉定区江桥嘉涌路6号楼713

　　hanged after

　　setting the ON pressure.

小型压力开关资料，日本SMC

　　Hysteresis setting trimmer

　　Pressure setting trimmer

　　Indicator light HYS

　　SE1（L）- 16/-17

　　? With pressure setting trimmer 1 （SET 1）， OUT

　　1 （Black lead wire, Red LED） can be set.

　　? With pressure setting trimmer 2 （SET 2）， OUT

　　2 （White lead wire, Green LED） can be set.

　　IZ

　　Pressure setting trimmer 2

　　Pressure setting trimmer 1

　　SET1

　　Indicator light SET2

　　Set point

　　Supply pressure

　　Atmospheric

　　pressure 0

　　Unsteady

　　adsorption

　　Non adsorption

　　Steady adsorption

　　High vacuum

　　? Regarding the pressure setting

　　? Set the possible min. pressure for adsorption

　　confirmation. If setting the pressure lower

　　than that, switch becomes ON in case that

　　adsorption is not completely done. If setting

　　the pressure higher than that, switch does

　　not become ON even though it may absorb

　　workpieces.

　　Observe the following precautions for setting

　　the vacuum pressure:

　　Use your fingertips to gently turn the

　　screwdriver.

　　Do not use a screwdriver with a large grip or

　　with a tip that does not fit into the trimmer

　　groove because this could strip the groove.

　　Hysteresis

　　Hysteresis is the pressure difference between the ON and

　　the OFF pressure of the output signal. The set pressure is

　　the pressure selected to switch from OFF to ON condition.

　　Set point

　　Atmospheric

小型压力开关资料，日本SMC