德国宝德带引导式微波的液位测量计概述

德国宝德带引导式微波的液位测量计概述

上海乾拓贸易有限公司

电话：021-39526589-8004

手机：17321056802 (微信)

邮箱：17321056802@163.com

企业QQ：2880626084

联系人：杨江玲

地址：上海嘉定区嘉涌路99弄6号楼713室

 Cable gland M20 x 1.5 Measurement type Level of liquids1) Min. dielectric fi gure Rod and cable Coax.-ø 21.3 mm εr > 1.6 εr > 1.4 

•  Universal level measurement device for liquids 

With a measuring range up to 75 m, the 8188 is best suited for tall vessels. 

Even process conditions such as strong steam generation, density fl uctuations

 or changes of the dielectric constant do not infl uence the accuracy of the measurement. 

型号 8188 是带柔性探针、杆状探针（两者可更换）

General data Materials Housing / Cover Seal ring / Ground terminal Wetted parts Process fi tting Rod and cable

 Coax.-ø 21.3 mm Process seal Inner conductor (up to the separation cable/rod) 

Spacers Rod-ø 8 mm Cable-ø 4 mm with gravity weight Coax.-ø 21.3 mm (tube)

PBT, Stainless steel 316L (1.4404) / PC NBR / Stainless steel 316L

使用型号 8188 也可实现液体分离层测量，典型示例为油/水分离层。

它是一款适用于在液体中测量的通用液位测量计

液体分离层测量

* Stainless steel 316L* Stainless steel 316L* Display LCD in full dot matrix Process connection Thread G

 or NPT - ¾", 1" Weight Housing Rod-ø 8 mm Cable-ø 4 mm Coax.-ø 21.3 mm Gravity weight (only with cable version) 

890 g approx. 400 g/m approx. 60 g/m approx. 1110 g/m approx. 200 g Length Rod-ø 8 mm Cable-ø 4 mm Coax.-ø 21.3 mm 

或同轴测量探针的液位测量仪，以持续测量液位。

它是为工业应用而设计的，用于在所有工艺技术区域中的液体中进行测量。

•  Liquid interface measurement • Insensitive to dust and steam 

0.3...6 m - Lateral load: 10 Nm 0.5...75 m - Max. tensile load: 2.5 KN 0.3...6 m - Lateral load: 60 Nm Electrical connection

对粉尘和蒸气不敏感

4...20 mA/Hart - 2 导体，ATEX/IECEx

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe,

 designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology. 

8188 的测量区域较大为 75 m，因此也适用于高容器。

Stainless steel 316L* and PPS for version up to 6 bar Stainless steel 316L

* and PEEK for version up to 40 bar Stainless steel 316L* and PEEK FKM

• 4...20 mA/HART - 2 wires, ATEX/IECEx certifi cation 

甚至流程条件，例如形成的蒸气、密度起伏或介电常数变更等，也不会影响测量精度。

在探针或容器壁上吸附或形成的冷凝液不会对测量结果造成影响。

Stainless steel 316L* PFA (only for coax. probe version) Stainless steel 316L

Build-up or condensation on the probe or vessel wall do not infl uence the measuring result. 

A liquid interface measurement is also possible with the Type 8188, typically an oil/ water interface.

德国宝德带引导式微波的液位测量计概述