电 话：021-39526589
网址：www.qiant.net
地 址：上海嘉定区嘉涌路99弄6号楼713室
油研流量比例阀,BG-03-32
3。开始时的注意事项
在初始操作或长休息后，上面的操作中，泵可吸流体的困难。
在这种情况下，排气阀应该事先安装的排出侧（型号为ST1004 - * -10
*目录序号酒吧。 EC - 3001 ），或略有放缓的排出侧连接的排气。
起动时，间歇性地操作泵，尽可能与无负载。
对于流体粘度启动，请参阅上述“液压油”的项目。
Set the suction pressure within -20 to +30 kPa (5.9 in. Hg vacuum to +4.3 PSIG) at the pump inlet.
In addition, use suction pipes having the sizes shown in the dimensional drawings. If the pump is installed above
the tank level, set the suction port more than 1.0 m (3.3 ft.) below from the oil level.
3. Precautions at Starting
At an initial operation or at an operation after a long rest, the pump may have difficulty in sucking up the fluid.
In such cases, an air bleed valve should be installed beforehand on the discharge side (model No. ST1004-*-10
油研流量比例阀,BG-03-32
021-39526589
网址：www.qiant.net
地 址：上海市嘉定区嘉涌路99弄
6号楼713室
旺旺
