CQM1-PA206,销售OMRON小型安全限位开关

CQM1-PA206,销售OMRON小型安全限位开关

则可能会导致油或水浸入开关内部。

（开关的保护结构为IP67，即放置水中一定时间后会

发生进在完成接线后以及使用开关前，请务必安装外盖。此外，请勿在

外盖打开的情况下接通开关电源。否则可能导致触电。

请勿同时进行2个或2个以上的标准负载（AC250V，3A）电路的

开关。否则可能导致绝缘功能下降

• 使用M4螺钉和弹簧垫圈安装开关，按照正确转矩紧固螺钉。

• 为了安全起见，请使用不易取下的螺钉，或者具有同等效果的安

• 如下所示，可以使用2个高度为4.8mm以下，直径为4 mm的螺

栓，插入开关下部的孔内，以便采用4点固定更牢固地安装。

• 确保挡块以正确角度接触传动杆。

如果斜向地向开关的传动杆（滚珠）施加负载，会导致传动杆及

安全注意事项对如何安全使用本产品的补充说明。

对如何防止操作失败、故障和产品性

by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

CQM1-PA206,销售OMRON小型安全限位开关

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility 

of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy.

 Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible 

for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii)

 repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be 

responsible for warranty, repair, indemnity or any other上。

CQM1-PA206,销售OMRON小型安全限位开关