SS-G01-C6S-GR-C1-31,JGH不二越叠加式直动型溢流阀

SS-G01-C6S-GR-C1-31,JGH不二越叠加式直动型溢流阀

将直动型溢流阀叠加化，控制液压

回路的较高压力，起到安全阀的作● 使用

z 压力调整范围用开启压力表示。

企业QQ；2880626086

手机：17302157802

联系人：刘艳

作为安全阀使用时，要使压力过载

成分高于必需回路使用。

c 开启压力因油箱口背压而异。

The superposition of the direct-acting relief valve, hydraulic control

Maximum pressure circuit, play a safety valve for use ●

z pressure adjustment range represented by the opening pressure.

x as a safety valve, to make the pressure overload

Higher than necessary circuit components use.

c opening pressure due to back pressure tank port to another.

v Because without floor and mounting bolts, so the need

Please select Press D-90~D-95 when necessary.

b 04 caliber does not drain (DR2), not

SS-G01-C6S-GR-C1-31,JGH不二越叠加式直动型溢流阀

And pressure center solenoid valve (D) with

Makes this valve stack is less than the pressure so that part of the circuit

Valve main circuit. w even if the pressure changes in the main circuit, you can make

Secondary side pressure remains unchanged after pressure adjustment.

e maximum operating pressure of 25, 35, MPa

w can be used to the maximum working pressure of 25,

35MPa {255, 357kgf / cm2} Pressure adjustment

In the range of 0.8~21, 25, 35MPa {8.2~

214, 255, 357kgf /

v 由于不含底板及安装螺栓，所以需

要时请按D-90〜D-95选定。

b 04口径中没有泄油口（DR2），不能

与压力中心型电磁阀（D）配合

使这种叠加阀是使部分回路压力于

主回路的阀。w 即使主回路的压力变动，也可以使

调整后的2次侧压压力保持不变。

e 较高使用压力为25, 35, MPa

w 可以用于较高使用压力为25，

35MPa {255, 357kgf/cm2}压力调整

范围为0.8〜21, 25, 35MPa {8.2〜

214, 255, 357kgf/

SS-G01-C6S-GR-C1-31,JGH不二越叠加式直动型溢流阀